
Tilt-Direct™ Pole Mount
DEEP™
Sophisticated digital signal processing provides greater low-frequency extension while precisely protecting the woofer from over-excursion.
DMT
Directivity Matched Transition matches the HF coverage angle to the natural coverage angle of the woofer for uniform frequency response over the entire coverage area.
Axisymmetrical
The conical wave guide eliminates the phase distortions of typical asymmetric horns for more natural reproduction.
1000 Watts
The same state of the art, light-weight Class D amplifier module powers all the K & KW Series models.
EQ Modes
Optimize for a specific application with the simple flip of a switch.
Energy Management
Automatic standby mode conserves energy and extends the life of the loudspeaker.
LED Operation
Turn of the front panel power LED or switch it to show limiting operation.
Remote Control
Easy to use remote gain control is ideal for installed applications.
Pro Appearance
Sleek lines and a full grille for a more professional look than other molded loudspeakers.
Locking IEC Power Cable
Help prevent unexpected interruptions.
Connectivity
Mic/line and RCA inputs along with onboard mixing controls allow greater flexibility.
Tilt-Direct™ Pole Mount
A simple turn of the dial is all it takes to alter the vertical directivity by 7.5 degrees.
Suspension and Mounting
With integrated threaded inserts, K Series is equally at home in mounted or flown applications.
Threaded Pole
The KSub comes with a threaded pole for a snug, safe fit.
Rugged Construction
K Series fullrange enclosures are molded from ABS, a harder more rigid material than typical plastics.
Intrinsic Correction
An exclusive QSC process that applies extensive acoustic measurements to noticeably improve audio quality.
Class D
Higher efficiency produces less heat and more sonic performance with lower overall current draw.
Protections
QSC's Guardrail™ technology protect your loudspeakers from overexcursion. On-demand cooling fan and thermal limiting prevent overheated electronics.
K Series
SPECIFICATIONS K8 K10 K12
Configuration Trapezoidal 2-way Multipurpose 2-way Multipurpose 2-way
Transducers
Low-frequency 8" cone transducer 10" cone transducer 12" cone transducer
High-frequency 1.75" diaphragm compression driver
Frequency Response (-6 dB) 66 Hz - 18 kHz 60 Hz - 18 kHz 52 Hz - 18 kHz
Frequency Range (-10 dB) 61 Hz - 20 kHz 56 Hz - 20 kHz 48 Hz - 20 kHz
Nominal Coverage (-6 dB) 105° conical 90° conical 75° conical
Maximum SPL1 127 dB peak 129 dB peak 131 dB peak
Amplifiers
Power Output2 1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak 1000 W continuous Class D
Input Impedance (ohms) XLR / ¼": 40k balanced / 20k unbalanced
XLR / ¼" MIC mode: 2260 balanced
RCA: 10k
Controls Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™),
HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators Power, Signal A, Signal B, Standby, Limit, Mic
Connectors Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼"
line level input, Dual Balanced male XLR full range line level out ,
Balanced male XLR "mix" out, Stereo RCA line level input, Remote
gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100-240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power) 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material Impact resistant ABS
Finish Black paint
Grille Rugged Powder-Coated Steel Grille
Dimensions (HWD) 450mm x 280mm x 269mm 519mm x 320mm x 300mm 603mm x 356mm x 356
Weight (Net) 12.2 kg 14.5 kg 18.6 kg
Available Accessories K8 TOTE, K8 YOKE, K10 TOTE, K10 YOKE, K12 TOTE, K12 Yoke
M10 Kit-CKit M10 Kit-C M10 Kit-C
K Series
SPECIFICATIONS KSub
Configuration 4th Order Bandpass
Transducers
Low-frequency 2 x 12" cone transducers
Frequency Response (-6 dB) 48 Hz - 134 Hz
Frequency Range (-10 dB) 44 Hz - 148 Hz
Maximum SPL1 130 dB peak
Amplifiers
Power Output2 1000 W continuous Class D (2x500 W)
2000 W peak
Input Impedance (ohms) XLR / ¼": 40k balanced / 20k unbalanced
Controls Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse),
Front LED (On/Off/Limit) Indicators Power, Signal, Standby, Limit
Connectors Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full
range line level out, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power) 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material Painted birch plywood
Finish Black textured paint
Dimensions (HWD) 665mm x 356mm x 714mm (including casters)
Weight (Net) 33.6 kg
Available Accessories KSub COVER
1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.
2 Independent of limiters and driver protection circuits.
All Specifications Subject to Change Without Notice.
Downloads
Download Brochure
Download Engineering Data Sheets
Download User Manual
Download Quick Start Manual